Ratio Start - Type 2 cable - 3 phase 32A
The Ratio Start is designed to be the easiest to use and install. No charging card or app is needed to start a charging session. Just plug in the car to start charging. Designed & manufactured in the Netherlands, this charger comes in 1 & 3 phase version
- Very high quality charger
- Very easy to use, just plug in your car and the charger starts charging
- Also available as socketed version
- This charger has no load balancing options
- This charger has no connectivity options
- The charger is not so small
Technical specifications
| Phase | 3 |
| Ampere | 32A |
| Power | 22kW |
| Dimensions | 400x250x105mm |
| 30mA AC earth leakage protection | Yes |
| 6mA DC earth leakage protection | Yes |
| Connectivity | No |
| Fixed cable | Yes |
| Cable length(s) | 5m |
| kWh meter built-in | No |
| RFID reader | No |
| Display | No |
| OCPP version supported | - |
Functional specifications
| Load balancing support | No |
| Vehicle to grid | No |
| Postponed charging | No |
| Controllable with APP | No |
| Charging with the sun | No |
| Manual settlement of charging sessions | No |
| Automatic settling of charging sessions | No |
The highest quality of an advantageous choice
The Ratio Start is Ratio's entry-level EV Charger. The charging station is designed to be the easiest to use and install. No charging card or app is needed to start a charging session. Just plug in the car to start charging.
Designed and manufactured in the Netherlands, these Ratio chargers are well known for their very high quality, reliability and ease of use. This charging station meets all European quality and safety requirements and the clever design of the charging station ensures that you always have a place to hang your charging cable.
This charger comes in both 1 and 3 phase versions where the 3 phase version can also be used on 1 phase. This makes it possible to connect the charger to 1 phase first and upgrade your connection to 3 phase later if necessary.
Main features
- Choice of 1- or 3-phase version
- 5 meter type 2 cable
- Plug & Charge: charging without charge card or app
- Static Load Balancing - select the desired charging current with the rotary switch inside the charger
- Earth fault protection: AC 30mA, DC 6mA
- Level of protection IP
- 2 year warranty
- 3 phase version also works on 1 phase
Documentation
- Dimensions (lxbxh in mm):400x250x105
- Cable length (in meters):5
- Max Charging Speed in km/h:40 km/hour
- Max Charging Speed in kW:7,4 kW
- Plug type Car side:Type 2
- Plug type Charge station side:Type 2
- Cable Attached or Socket:Cable Attached
- Display:No
- Phases:1 or 3
- Amperage:32
- Network Technologies Supported:No
- Mobile app Support:No
- Remote station management:No
- Scheduled Charging:No
- Colour:Black
- RFID reader:No
- Load Balancing:No
- Solar charging:
- Plug & Charge Enabled:Yes
- Requires Professional Installation:Yes
- IP Rating:IP54
- Number of vehicles that can be charged:1
- RCD type build in:30mA Type A
- 6mA DC Current Detection:
- Home Automation Support:No
- MID certified meter:No
- kWh meter Build in:No
- Smart Tesla charge port opening :
Related products
Recently viewed
The product is in your shopping basket!
Others also bought these products.
Soolutions Cable holder and hanger for type 2 cables
ETEK 30mA Residual Current Circuit Breaker RCCB
